A crystalline sponge based on dispersive forces suitable for X-ray structure determination of included molecular guests

A crystalline porous material showing one-dimensional (1-D) rectangular micropores (12 × 9 Ų) has been assembled from a semirigid macrocyclic tetraimine and EtOAc as the templating agent. The 1-D nature of the material is intrinsic to the conformationally rigid structure of a macrocyclic sub-unit bearing four cyclohexylidene residues. The multiple dispersive forces established among the aliphatic residues glutted the 1-D channels and provided thermal stability to the material at temperatures below 160 °C. Upon removal of the template, the structure of the empty solid exhibited permanent microporosity (S _BET = 342 m² g^–1). Being a true molecular sponge, the channel framework of this material allowed the inclusion of a variety of molecular sample guests without compromising its crystalline nature. Remarkably, this crystalline material enabled the structure determination by X-ray diffraction of the included molecules. Theoretical studies demonstrated the vital role played by the dispersive forces in the overall stabilization of the crystal packing.     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Effect of limonene on the frontal ring opening metathesis polymerization of dicyclopentadiene

The frontal ring opening metathesis polymerization (FROMP) of dicyclopentadiene (DCPD) in the presence of limonene, using second generation Grubbs’ catalysts, is reported. The effect of limonene on the amount of catalyst and the typical frontal polymerization parameters, as maximum temperature (T_max) and velocity of the front (V_f), is studied. In addition, the influence of limonene on the mechanical properties of the polymeric samples is reported. Finally, a deep study on the swelling properties of polymers is done. It has been demonstrated that limonene acts as both inhibitor and solvent of the catalyst. The T_max, V_f, T_g, and Young modulus values decrease as the amount of limonene increases, and the polymer samples swell in THF depending on the amount of limonene. All results indicate that the limonene addition on FROMP of results in advantages on the polymerization reaction and its parameters and on the final polymer properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 63–68     

Enrichments of post‐translational modifications in proteomic studies

More than 300 different protein post‐translational modifications are currently known, but only a few have been extensively investigated because modified proteoforms are commonly present in sub‐stoichiometry amount. For this reason, improvement of specific enrichment techniques is particularly useful for the proteomic characterization of post‐translationally modified proteins. Enrichment proteomic strategies could help the researcher in the challenging issue to decipher the complex molecular cross‐talk existing between the different factors influencing the cellular pathways. In this review the state of art of the platforms applied for the enrichment of specific and most common post‐translational modifications, such as glycosylation and glycation, phosphorylation, sulfation, redox modifications (i.e. sulfydration and nitrosylation), methylation, acetylation, and ubiquitinylation, are described. Enrichments strategies applied to characterize less studied post‐translational modifications are also briefly discussed.     

Effect of chitosan derivatives as rubber antioxidants for increasing durability

A series of chitosan derivatives, namely polydiethylamino-ethylmethacrylate-chitosan-graft-copolymer (chitosan-g-DEAEMA), polycarboxy-chitosan-graft copolymer (chitosan-g-COOH), polyvinyl alcohol chitosan-graft-copolymer (chitosan-g-VOH), and carboxymethyl-chitosan (CM-chitosan), were synthesized and investigated as antioxidants for natural rubber (NR) and acrylonitrile butadiene rubber (NBR) mixes and vulcanizates to increase their durability. The rheometric characteristics of the rubber mixes were determined using an oscillating disc rheometer. The physico-mechanical properties of the rubber vulcanized were measured before and after exposure to thermal oxidative aging. It was found that the CM-chitosan had an accelerating effect on the curing process of NR and NBR. Also, the investigated polymers enhanced the properties of rubbers (NR and NBR) especially after ageing up to 7 days compared with commercial antioxidants, such as phenyl ß-naphthylamine (PßN) and N-isopropel-Nphenyl-p-phenylene diamine (IPPD) which are used in the rubber industry. After ageing, the retained values of tensile strength, modulus at 100 % strain, and elongation at break were improved. The optimum concentration of the investigated compounds used to give good properties was found to be 1–2 parts per 100 of rubber (phr). In addition, these prepared polymers showed a decrease in the equilibrium swelling of rubber in toluene which is the proper solvent and consequently increases the crosslink density for rubbers.     

Improved rapid assay of plasma uric acid by short-end injection capillary zone electrophoresis

A rapid and simple short-end injection capillary zone electrophoresis method was developed for the quantification of plasma uric acid. The separation was performed in an uncoated fused-silica capillary (50 μm ID, 60 cm total length, 10.2 cm effective length) by using as a background electrolyte a 75 mmol/L glycylglycine solution titrated with NaOH 5 mol/L to pH 9.0, a voltage of 28 kV, a cartridge temperature of 15 °C, and direct UV detection at 292 nm. Under optimized conditions, uric acid was determinate in little more than 1 min (1.076 minutes). In order to verify the accuracy of the analysis, urate levels were measured in 543 apparently healthy volunteers by the new assay and our previous method, and the obtained data were compared by Passing–Bablock regression, Bland–Altman test, and a new regression-based approach, which showed a good agreement between two methods.     

Synthesis and characterization of graphene‐containing thermoresponsive nanocomposite hydrogels of poly(N‐vinylcaprolactam) prepared by frontal polymerization

Thermoresponsive poly(N‐vinylcaprolactam) nanocomposite hydrogels containing graphene were successfully prepared by frontal polymerization. High concentration of graphene (5.0 mg/mL) was obtained by direct graphite sonication in the self‐same liquid monomer, thus avoiding any chemical manipulation and obtaining “real” graphene as nanofiller instead of one of its more or less oxidized derivative, which is what generally reported in published reports. Furthermore, the corresponding nanocomposites were obtained without using any solvent to be eventually removed. The materials were fully characterized by RAMAN, SEM, and TEM, and their swelling behavior and rheological properties were investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Comparison between the shifted-Laplacian preconditioning and the controllability methods for computational acoustics

Processes that can be modelled with numerical calculations of acoustic pressure fields include medical and industrial ultrasound, echo sounding, and environmental noise. We present two methods for making these calculations based on Helmholtz equation. The first method is based directly on the complex-valued Helmholtz equation and an algebraic multigrid approximation of the discretized shifted-Laplacian operator; i.e. the damped Helmholtz operator as a preconditioner. The second approach returns to a transient wave equation, and finds the time-periodic solution using a controllability technique. We concentrate on acoustic problems, but our methods can be used for other types of Helmholtz problems as well. Numerical experiments show that the control method takes more CPU time, whereas the shifted-Laplacian method has larger memory requirement.